What is cleaner validator.exe

Using regedit. This will cause HTML Validator to reset this value to the default value which will likely fix the problem. If this doesn't work, and you have manually changed the Tag Inserter Configuration, then make sure that it is in the correct format or HTML Validator will not be able to load it. HTML Validator freezes when trying to start. This may happen if you have disconnected network drives. Check to make sure that you have no disconnected network drives and then try to restart HTML Validator.

If this doesn't work, try using regedit. You can have all your registration information and license keys emailed to you again, including information on how to download a registerable version.

Send Registration Information. If you have two computers such as a desktop and notebook and you are the only user of both computers then you can buy only one license and use it on both computers. I'm not getting the email with my registration information. First, make sure that your registration information and license keys have been emailed to you. If you do not receive it within 24 hours although normally it comes much faster , then the most likely cause is a spam filter that is incorrectly filtering or blocking the email.

You may need to address this with your spam filtering software to make sure that the email is not being discarded or incorrectly sent to the wrong folder. If the above doesn't resolve the problem or you do not use spam filtering software or spam filtering rules on your computer, then your email service provider or ISP may be filtering or blocking the email. If you do not receive your registration information email within 24 hours after it is sent then we recommend that you contact your email service provider or ISP and ask them why you are not receiving email from htmlvalidator.

Therefore, it needs to be registered for each user who will use it under a different user account. For v The same is true for other versions, but replace "V" in the value names with the correct version, "V" for v The values should be your registration name, key, and PIN number as given in your license information.

Note that each user account will still have its own options and settings they will not be shared among accounts. You can also have your registration information with the latest keys sent to you again. If the above doesn't work, then another possible cause of this problem is when there is an old or trial version of csevalidator. Search your computer for csevalidator. This file should only be in the Windows system folder. How can I see the license agreement?

See also the current license agreement in the online version of the documentation. If you think you've found a bug, are using the latest version, and can consistently reproduce the bug, then please contact us. Other possible causes of this are bad hardware such as defective memory , running too many programs in the background, and running software that interferes with the normal operation of your computer. You may also want to try updating your video drivers, as bugs in video drivers have been known to cause system and application crashes.

Runtime Issues HTML Validator freezes stops responding while trying to load or reload a document or for unknown reason. How do I change the sound that is played at the end of a validation? How to I change the default folder when opening a file? To change the selected folder, view the Resource Window , select the Shell tab, and then select the folder that you want to be the default in the top half of the Resource Window.

For the lite edition v7. Printing I got a printing error when trying to print. Validation Issues The validator is telling me that not all of my tags are closed. How do I find out which tags are not closed? It is normal for some tags not to be closed have end tags. If a tag that should be closed is not closed then the validator will point it out with an error message.

If it is acceptable for a tag not to have an end tag then the validator will not generate any error or warning messages and will not tell you specifically which tags are not closed. Why is the validator telling me that some of my tags are not closed have no end tag when the end tags are there?

The most likely cause of this is that there is a mismatched quotation mark in a tag, either an extra one or a missing one. This is confusing the parser and the validator is not able to see the end tags that are there. To find the problem, look for the first message that starts with "Reached the end of the line before a closing quote The mismatched quotation mark is probably on or near that line.

See also: What do the messages "Reached the end of the line Important: If you don't receive any "Reached the end of the line before a closing quote You may want to go to the Validator Engine Options and uncheck this option so that "Reached the end of the line before a closing quote We recommend that you keep this option unchecked.

What do the messages "Reached the end of the line The "Reached the end of the line before a closing quote If 1, then we recommend that you put the whole quotation on one line and do not wrap it onto multiple lines. If 2, then you should look for an extra or missing quotation mark in the line that causes the first "Reached the end of the line before a closing quote The "Reached the end of the document before To find where the problem is likely to be, look at the first line that causes the "Reached the end of the line before a closing quote The location of this file and dangerous rating is.

To check whether the exe file is legit you can start the Task Manager. Then click on the columns field and add Verified Signer as one of the columns. Now look at the Verified Signer value for Validator. If the developer of the software is legitimate then it is not a virus or malware.

If the developer is not listed or seems suspicious, you can remove it using the uninstall program. Based on our analysis of whether this Validator file is a virus or malware we have displayed our result below. To remove Validator. This will uninstall Validator. In order to stop the validator. As per the information we have the Validator. But a good file might be infected with malware or virus to disguise itself. You can find this by opening the Task Manager application Right-click on Windows Taskbar and choose Task Manager and click on the Disk option at the top to sort and find out the disk usage of Validator.

You can find this by opening the Task Manager application and find the Validator process and check the CPU usage percentage. To check Validator. For buildings: the ability to copy entries from one culture to another or remove them from a culture. The tool lets you select which ones to delete.

Usage check validation : search various files commands, conditions, etc. HE also reports missing images culture aware and videos. Reformatting options to help reduce text file size and increase readability. Buildings: auto-reduce function to restructure a building's culture entries to reduce duplication of text. Building Image Replicator: quickly duplicate, name and position in the folder tree building image s for one or multiple cultures.

Missing Shadows: find and optionally autofix images that have a missing shadow effect in their alpha channel. Details are in the manual which may be downloaded separately if you wish to read it without downloading the tool. The manual is also included in the tool. EB: 15, EU: 6, Originally Posted by The Manual. You may place this folder anywhere on your computer. When the tool starts up it will auto-read the relevant TW files if it can find them.

The M2TW installation folder or, for a mod, the mod folder. NOTE: the tool cannot read packed files. Spoiler Alert, click show to read:.

Saving CombatV config now also saves the "gameName". Was getting "CombatV might have changed" message every time I started the tool for a mod, if a faction game name had changed in that mod. No more flashing "there are errors" - was a CPU killer. Instead the Errors tab title is just coloured red. Anc image display ignores alpha channel as game does.

Fixed a window refresh issue: some images weren't always displaying e. HEs, units. A trait is now counted as "accessed" if it is an AntiTrait of anything. Unit images: now shows both info and card images. Images displayed via a background thread: faster to change the current unit selection no longer waits for images to be displayed. Units: added filters for missing info and card images. Added image checks to Usage Check.

Usage Check: Historic Events: comments were not being ignored. Application errors now written to a log file. Can also rebuild enum files. More info added to missing custom campaign and historic battle folder warning messages. Now reports missing advisor scripts. Usage Checks can now also check any advisor scripts. Text editor popup window now remembers last-used size and position. Text that should not contain line breaks e.

Effects Description Walkthrough added to manual. Missing Shadows - new. BUGFIX: if no source could be found on startup and user closes app window instead of finding the source then app window would not close.

Previously two spaces in a row would be displayed as only one space. Last-used source location now automatically used when tool restarts. No longer reads some TW files that it never needed to, including maps; slightly faster startup times and no more halting of the reading process due to map errors.